Trimble GPS Pathfinder® Office
DOWNLOADS
Version 4.10
Version 4.00
Version 3.10
Version 3.00(updates only)
Version 2.90(updates only)
Other Downloads
Support Notes (will open in seperate window)
_____________________________________________________
Version 4.10 Downloads and Updates
v4.10 - GPS Pathfinder Office, Software
Download v4.10 of the GPS Pathfinder Office software.
-
New Features
-
Entitlement
-
If you purchased a previous version after 3 March 2007 you are entitled to v4.10. Use your installation code to install v4.10.
-
If you have a software maintenance agreement valid on 3 March 2008 you are entitled to v4.10. Use your installation code to install v4.10.
-
If you don't have a software maintenance agreement valid on 3 March 2008, contact your local Tri-Global representative.
-
Download Instructions
v4.x - GPS Pathfinder Office, Mapping & GIS License Manager
(Mapping & GIS License Manager.zip - 27388 KB)
The Mapping and GIS License Manager software allows you to manage multiple licenses for the GPS Pathfinder Office software. Using the GPS Pathfinder Office License Administrator software, users of the GPS Pathfinder Office software can choose either a single use or a floating license. This software is available on the v4.x CD and the full system download. Alternatively you can download it separately from here.
Installation Instructions
DOS Utilities
(DOS UTILS.zip - 557 KB)
A number of standalone utility programs were previously included with GPS Pathfinder Office. These small programs are run from the DOS prompt. Some standalone utilities provide functions that are not available in the GPS Pathfinder Office software main menu. Some provide functions that are available in GPS Pathfinder Office, so the utilities are an alternative method for performing the task.
Installation Instructions
-
Download and unzip the file into a new directory on your PC. Check the option "Use folder names" when unzipping the file.
-
For instructions on using the DOS utilities double-click on the dosutils.hlp file.
Note: The DOS utilities are not supported on 64-bit operating systems.
GPS Pathfinder Office v4.10 Developer Help Files
(PFOffice_DvlprHelp_410A.zip - 215 KB)
The two help files contained in this compressed file are targeted at developers who are creating automated correction and export procedures using GPS Pathfinder Office v4.10.
Installation Instructions
__________________
UPDATES
_____________________________________________________
Version 4.00 Downloads and Updates
v4.00 - GPS Pathfinder Office, Software
Download v4.00 of the GPS Pathfinder Office software.
-
New Features
-
Entitlement
-
If you purchased a previous version after 7 March 2006 you are entitled to v4.00. Use your installation code (previously known as the installation serial number) to install v4.00.
-
If you have a software maintenance agreement valid on 7 March 2007 you are entitled to v4.00. Use your installation code to install v4.00.
-
If you don't have a software maintenance agreement valid on 7 March 2007, contact your local Tri-Global representative.
-
Download Instructions
v4.x - GPS Pathfinder Office, Mapping & GIS License Manager
(Mapping & GIS License Manager.zip - 27388 KB)
The Mapping and GIS License Manager software allows you to manage multiple licenses for the GPS Pathfinder Office software. Using the GPS Pathfinder Office License Administrator software, users of the GPS Pathfinder Office software can choose either a single use or a floating license. This software is available on the v4.x CD and the full system download. Alternatively you can download it separately from here.
Installation Instructions
DOS Utilities
(DOS UTILS.zip - 557 KB)
A number of standalone utility programs were previously included with GPS Pathfinder Office. These small programs are run from the DOS prompt. Some standalone utilities provide functions that are not available in the GPS Pathfinder Office software main menu. Some provide functions that are available in GPS Pathfinder Office, so the utilities are an alternative method for performing the task.
Installation Instructions
-
Download and unzip the file into a new directory on your PC. Check the option "Use folder names" when unzipping the file.
-
For instructions on using the DOS utilities double-click on the dosutils.hlp file.
Note: The DOS utilities are not supported on 64-bit operating systems.
__________________
UPDATES
v4.00 - GPS Pathfinder Office, Differential Correction Update (PFO400Update008)
(PFO400Update008.exe - 1650 KB)
This update:
It also incorporates changes from previous Differential Correction updates, which:
-
Added differential correction support for SSF files collected with a Nomad receiver.
-
Improved the algorithm used when Automatic carrier and code processing is selected, to choose the better position between carrier and code solutions instead of always choosing carrier over code.
-
Allowed the Differential Correction Wizard to follow Rover SNR mask behavior
-
Added post-processing support for the Juno ST and other SiRF 3 receivers.
-
Addressed a failure to carrier process positions due to a bug in the DAT to RINEX base file conversion.
-
Addressed conversion failures encountered while performing differential corrections using RINEX 2.11 base station files containing L2C and GLONASS measurements.
-
Improved post-processing accuracy over short baselines when using L1/L2 in a noisy environment.
_____________________________________________________
Version 3.10 Downloads and Updates
v3.10 - GPS Pathfinder Office, Software
Download v3.10 of the GPS Pathfinder Office software.
-
New Features
-
Entitlement
-
If you purchased v3.00 after 19 January 2005 you are entitled to v3.10. Use your installation serial number to install v3.10.
-
If you have a software enhancement agreement valid on 19 April 2005 you are entitled to v3.10. Use your installation serial number to install v3.10.
-
If you don't have a software enhancement agreement valid on 19 April 2005, contact your local Tri-Global representative.
-
Download Instructions
-
This download is 224MB in size.
-
Download and unzip the file into a temp location on your PC.
-
Run setup.exe and follow the instructions on screen.
__________________
UPDATES
v3.10 - GPS Pathfinder Office, Differential Correction Update (PFO310Update013.exe)
(PFO310Update013.exe - 12427 KB)
This update:
It also incorporates changes from previous Differential Correction updates, which:
-
Addressed a failure to carrier process positions due to a bug in the DAT to RINEX base file conversion.
-
Addressed conversion failures encountered while performing differential corrections using RINEX 2.11 base station files containing L2C and GLONASS measurements.
-
Improved post-processing accuracy over short baselines when using L1/L2 in a noisy environment.
-
Added postprocessing support for the GPS Pathfinder XB receiver.
-
Fixed a bug introduced in the previous update in which satellite constellation (PRN) records were empty for non-static occupations. This caused positions to be filtered out on export.
-
Improved static corrections when excessive antenna movement is detected.
-
Addressed a week rollover issue in H-Star processing.
-
Addressed occasional corrupt zip file downloads using iGate.
-
Addressed issues with base providers that use the iGate protocol.
-
Addressed an issue where the reported estimated accuracy ranges did not exactly match the estimated accuracies of the corrected positions.
-
Improved handling of different formats of RINEX files.
-
Improved H-Star results for static occupations in difficult environments.
-
Contained changes required for H-Star postprocessing. The update is compatible with GPS Pathfinder ProXH firmware version 1.51 and greater.
v3.10 - GPS Pathfinder Office, Receiver Support Update (PFO310Update009)
(PFO310Update009.exe - 3426 KB)
This update addresses the following:
-
Enables GPS Pathfinder Office to recognize files from the GPS Pathfinder XB receiver.
-
It also incorporates changes from a previous update (PFO310Update002) which enabled GPS Pathfinder Office to recognize files from the GeoExplorer 2005 Series receivers.
_____________________________________________________
Version 3.00 Updates
v3.00 - GPS Pathfinder Office, Differential Correction Utility Update (3.00-02)
(Correct30002.exe - 1632 KB)
This update addresses the following:
NOTE: You must also download the latest version of the base station list, and update your CORS providers with the new definitions.
This update also incorporates all previous Correct utility updates, which addressed the following:
-
Fixes problem correcting first position in a segmented line feature when using SuperCorrect.
-
Fixes occasional correction problems for non-SuperCorrect positions during changeovers in the broadcast ephemerides.
-
Fixes problem where non-SuperCorrect data collected in the last two hours of a GPS week cannot be differentially corrected.
-
Fixes problem with UFCORS returning empty obs file if GPS start time is in a single-digit hour.
-
Fixes download error from non-CORS providers when a station ID is specified without a navigation format.
-
Fixes problem with base file filtering and smoothing when the base file spans multiple GPS weeks.
-
Fixes problems with calculating time extents for DAT files collected with the Trimble GPSBase software.
-
Fixes occasional RINEX to DAT conversion issues.
-
Fixes problem with precision estimates when using RINEX base files that do not contain SNR values.
-
Adds capability to use compressed RINEX files from within pkzip files.
_____________________________________________________
Version 2.90 Updates
v2.90 - GPS Pathfinder Office, TerraSync 2.30 Support Update
(TS230Support.zip - 2005 KB)
In this update:
-
Configuration Manager supports changes to the TerraSync 2.30 configuration.
-
The SSF Record Editor utility now identifies the VRS realtime source.
-
GPS Pathfinder Office recognizes files from TerraSync 2.30.
-
It is also recommended that the following updates be applied: Main Program 2.90-01 or later and Data Transfer 2.90-05 or later
v2.90 - GPS Pathfinder Office, GPScorrect 1.01 Support Update
(GPScorrect101Support.zip - 2848 KB)
This update:
-
Enables GPS Pathfinder Office to recognize files from GPScorrect for ArcPad.
-
Adds the ShapeCorrect utility for merging corrected positions into shapefiles. This now provides improved handling of Shapefiles containing only one point feature and improved matching of positions between the SSF and Shapefiles.
-
Enables the Differential Correction utility to process files from GPScorrect for ArcPad. (Also includes all fixes to the Differential Correction utility provided in the Correct 2.90-03 and earlier updates.)
v2.90 - GPS Pathfinder Office, Export Update (2.90-02)
(Export29002.zip - 1197 KB)
This update addresses the following issues:
v2.90 - GPS Pathfinder Office, Data Transfer Update (2.90-05)
(DataTransfer29005.zip - 2963 KB)
This update addresses the following:
This update also incorporates all previous Data Transfer updates, which addressed the following:
-
Fixes occasional, fatal errors when sending files associated with coordinate systems or configurations. Background files sent to TerraSync are no longer displayed as data files that can be received.
-
Distance-distance offsets that are sent to a datalogger are now computed correctly.
-
GeoExplorer 2 files created using a data dictionary created or edited in 2.90 are no longer corrupted (the file was truncated) when subsequently received in GPS Pathfinder Office.
-
Files can now be sent to TerraSync when the user's temporary file path has a dot character in it.
-
The last waypoint in a selected range is now included when sending to TerraSync or ASPEN.
-
Coordinate system files sent to ASPEN are now received into the correct folder.
-
Data files sent to Asset Surveyor 5.20 and subsequently received back are no longer corrupted (various errors were reported when the file was opened).
-
Very occasionally, files received from Asset Surveyor were corrupted during conversion and could not be opened in GPS Pathfinder Office.
v2.90 - GPS Pathfinder Office, Correct Update (2.90-04)
(Correct29004.zip - 1482 KB)
This update addresses the following:
-
Files downloaded from the User-Friendly CORS (UFCORS) service can be unzipped successfully.
-
NOTE: You must also download the latest version of the base station list, and update your CORS providers with the new definitions.
-
This update also incorporates all previous Differential Correction utility updates, which addressed the following:
-
Fixes occasional RINEX to DAT conversion issues.
-
Fixes occasional failure to correct with multiple RINEX files.
-
Fixes occasional failure to carrier phase process SuperCorrect files with mixed code/carrier features
-
Now downloads RINEX data from case-senstive ftp servers which use upper case filenames.
-
Local file search now correctly identifies the time range of all RINEX files.
-
Very large files (greater than 65535 positions) can now be processed.
-
Processing multiple rover files against a base station, which provides data at a greater than 30 sec data rate, no longer causes a fatal error.
-
Improved base file filtering and smoothing results when using RINEX files which have missing doppler values.
-
Corrected spelling of "February" allows successful download from provider URL's that use month names.
-
Fixes occasional failure to carrier phase process SuperCorrect files with mixed code/carrier features.
v2.90 - GPS Pathfinder Office, Coordinate System Update (2.90-01)
(CoordSystem29001.zip - 1011 KB)
This update addresses the following issue:
v2.90 - GPS Pathfinder Office, Main Program Update (2.90-01)
(MainProgram29001.zip - 1932 KB)
This update provides for the optional display of coordinates in US National Grid (USNG).In addition, it addresses the following:
-
Adding time-zones when using non-English regional settings no longer corrupts all time-zones.
-
Web map downloads no longer fail when the user's temporary file path has a dot character in it.
-
Deletion and undeletion of features containing nested features is now more reliable.
-
Multiple raster backgrounds are now printed correctly.
v2.90 - GPS Pathfinder Office, Help Files (Japanese)
(japanesehelp.zip - 4226 KB)
_____________________________________________________
Other Downloads
Trimble Data Transfer Utility
The Trimble Data Transfer software transfers data from a range of devices to your PC. You can then import the data into the Trimble Geomatics Office™, Trimble Total Control™, Terramodel®, Trimble Business Center , GPS Pathfinder® Office software, or Trimble Link™, or the GPS Analyst™ extension for ESRI ArcGIS software.
Devices that you can download data from include:
-
Trimble Survey Controller
-
Trimble Series 4000 and R/5000 receivers
-
Trimble 3300
-
Trimble 3600 (Elta, Geodimeter, TDS)
-
Trimble 5600 (Elta, Geodimeter, TDS)
-
Trimble Digital Fieldbook
-
DiNi Digital Level
-
Trimble Survey Pro
-
All Mapping and GIS data collectors
-
Nikon total stations (serial connections)
-
Trimble Business Center
The Trimble Data Transfer software is free to download:
Instructions
-
To install/upgrade the Data Transfer software, from the download page, select a language and then click "Install Now".
-
To install/upgrade the Data Transfer software, you require Microsoft Internet Explorer (version 4.0 or later) or Netscape Navigator version 4.0.
-
Make sure that you upgrade the software in the same language as that of your previously installed software.
-
It is recommended that you restart your computer after installing the Data Transfer software.
Microsoft Windows NT/2000/XP/VISTA Users
You must be an administrator in order to install the Data Transfer software.
SBAS.INI
(SBAS.ini - KB)
Updated: 1 August 2007
-
Contains the list of SBAS satellites, including the two recently launched WAAS satellites - PRNs 135 and 138.
-
Required when using Custom mode in Trimble field software to select particular satellites to track, and exclude from the tracking list.
-
Details on the new WAAS satellites and how to install the SBAS.INI file are included in the Support Note titled Status Update: New WAAS Satellites and Trimble GPS Receivers.
SATDGPS.INI File
(Satdgps.ini - 2 KB)
Updated: 10 March 2008
-
Contains the list of frequencies used by satellite DGPS providers.
-
Use the GPS Pathfinder Office Data Transfer utility to load this file onto your device running TerraSync.
-
If you have GPS Analyst installed on a PC, copy this file into the folder C:\Program Files\Trimble\GPS Analyst\Bin.
-
If you have GPS Controller, GPS Pathfinder Controller, GPScorrect, or an application developed using the GPS Pathfinder Tools SDK installed on a PC, copy this file into the folder C:\Program Files\Common Files\Trimble\Config.
-
If you have GPS Controller, GPS Pathfinder Controller, GPScorrect, or an application developed using the GPS Pathfinder Tools SDK installed on a Windows CE or Pocket PC device, copy this file into the folder \Program Files\Common Files\Trimble\Config. This folder will be located on the Disk or in RAM depending on where GPS Controller, GPScorrect, GPS Pathfinder Controller, or your application developed using the GPS Pathfinder Tools SDK is installed.
-
If you are using Asset Surveyor download this version of SATDGPS.INI and use the GPS Pathfinder Office Data Transfer utility to load this file onto your device.
ANTENNA.INI File (Translated)
(TranslatedAntenna.zip - 349 KB)
Translated Antenna files for Mapping & GIS Software (updated 10 March 2008).
This zip file contains translated antenna files for use with the following software:
Antenna types, names, and measurement points have been translated in the following languages:
-
Chinese (Simplified)
-
Chinese (Traditional)
-
Croatian
-
Czech
-
Danish
-
Dutch
-
English
-
Estonian
-
Finnish
-
French
-
German
-
Greek
-
Hungarian
-
Italian
-
Japanese
-
Korean
-
Norwegian
-
Polish
-
Portuguese
-
Russian
-
Serbian
-
Spanish
-
Swedish
-
Turkish
To use a translated antenna file see instructions in the readme.txt file.
|