TerraSync™ Software

DOWNLOADS

Version 4.10
Version 4.02
Version 3.30
Version 3.21
Version 3.20
Version 3.05
Version 3.01
Version 3.00
Version 2.61
Version 2.53
Version 2.41
Version 2.31 (Recon® device only)
Version 2.30
Version 2.21
Version 1.22

Other Downloads

Support Notes (will open in new window)

_____________________________________________________

Version 4.10 of TerraSync

A TerraSync software installation code can only be activated on one Windows Mobile (version 5.0 or 6) powered device at a time. If you activate an installation code on the wrong device or need to change the device the software is activated on you will need to contact your Trimble Reseller to request it be deactivated.

• New Features

  • See the Release Notes for a full list of new features and details on how to install the software.

• Entitlement

  • Customers whose TerraSync software maintenance expiry date is on or after 1 December 2009 are eligible for a free upgrade to the new version. Use your existing installation code to upgrade to v4.10.

  • If you do not have a Software Maintenance Extension valid on 1 December 2009, contact your local Tri-Global Representative for details on upgrading to v4.10

• Requirements

  • TerraSync v4.10 requires the GPS Pathfinder Office software v4.20

Version 4.02 of TerraSync

A TerraSync software installation code can only be activated on one Windows Mobile (version 5.0 or 6) powered device at a time. If you activate an installation code on the wrong device or need to change the device the software is activated on you will need to contact your Trimble Reseller to request it be deactivated.

• New Features
  • A issue that did not allow real-time solutions to converge to 10 cm when using a GeoXH™ handheld running firmware version 2.11 has been fixed.
  • Refer to the version 4.02 Release Notes for installation instructions.
• Version 4.02 of the TerraSync software includes the following changes:
  • Support for the Trimble Yuma rugged tablet computer.
  • Support for the Trimble GPS Pathfinder ProXRT receiver running firmware version 3.72.
  • Support for the Trimble R8 Model II receiver running firmware version 3.64. (Later versions are not currently supported.)
  • Support for software activation on field computers powered by the Windows Mobile version 5.0 software or version 6 operating system. For more information, refer to the TerraSync Software Getting Started Guide.
  • Support for the Indian GAGAN satellites. The frequencies used by the Indian GAGAN SBAS system have been added to the SBAS.ini file; you can now manually select these frequencies for use with receivers that support them.
  • Proper handling of waypoints stored in USNG (NAD83) coordinates. (USNG (NAD27) is not supported.)
  • Support for OmniSTAR frequencies that have 500 Hz offsets.
  • The heading display for SiRF-based receivers now correctly displays headings between 326 and 359 degrees.
  • A bug that caused the TerraSync software to export features with no attribute data to ESRI ShapeFile format has been corrected.
  • Version 4.00 or later of the TerraSync software no longer ships with an Updater Utility.
  • Support for the Trimble GPS Pathfinder ProXRT receiver running firmware version 3.60 has been discontinued. You will need to update your receiver's firmware to version 3.72. For the firmware version 3.72 and instructions on how to upgrade your existing receiver firmware, go to http://www.trimble.com/pathfinderproxrt_ts.asp.
• Entitlement
  • Customers whose TerraSync software maintenance expiry date is on or after 2 December 2008 are eligible for a free upgrade to the new version. Use your existing installation code to upgrade to v4.02.
  • If you do not have a Software Maintenance Extension valid on 2 December 2008, contact your local Trimble representative for details on upgrading to v4.02
• Requirements
  • TerraSync v4.02 requires the GPS Pathfinder Office software v4.10

Version 3.30 of TerraSync

• New Features
  • Refer to the version 3.30 Release Notes for a detailed listing of the new features in version 3.30, and installation instructions.
• Entitlement
  • Customers whose TerraSync software maintenance expiry date is on or after 2 December 2008 are eligible for a free upgrade to the new version. Use your existing installation code to upgrade to v3.30.
  • If you do not have a Software Maintenance Extension valid on 2 December 2008, contact your local Tri-Global representative for details on upgrading to v3.30
• Requirements
  • TerraSync v3.30 requires the GPS Pathfinder Office software v4.10

v3.30 - TerraSync software for Windows Mobile 5.0/6
(TerraSyncWMSetup.exe - 17954 KB)

v3.30 - TerraSync software for Windows Mobile 2003
(TerraSyncWM2003Setup.exe - 14814 KB)

v3.30 - TerraSync software for Windows 2000, Windows XP (Home, Professional, or Tablet PC Edition) & Windows Vista (Home Basic, Home Premium, Business, Ultimate, and Enterprise editions)
(TerraSyncDesktopSetup.exe - 11420 KB)

Version 3.21 of TerraSync

• New Features

  • Support for the GeoExplorer 2008 series of handhelds.

  • If a Bluetooth telephone connection to the Internet is lost, the TerraSync software now automatically attempts to reconnect.

  • When using real-time corrections, the TerraSync software reports if code or carrier phase corrections are being applied, rather than just reporting that GPS positions are being calculated.

  • The Magnetic Declination Calculation has been updated.

  • Refer to the version 3.21 Release Notes for a detailed listing of the new features in version 3.21, and installation instructions.

  • TerraSync v3.21 no longer supports Win CE .Net platforms

• Entitlement

  • Customers whose TerraSync software maintenance expiry date is on or after 15 May 2008 are eligible for a free upgrade to the new version. Use your existing installation code to upgrade to v3.21. Customers are eligible:

    • If you purchased TerraSync Professional edition on or after 15 May 2007.

    • If you purchased TerraSync Standard edition with 9-month software warranty extension on or after 15 May 2007

    • If you purchased TerraSync Standard edition with 90-day warranty on or after 15 February 2008

    • If you have a Software Maintenance Extension valid on 15 May 2008

  • If you do not have a Software Maintenance Extension valid on 15 May 2008, contact your local Tri-Global representative for details on upgrading to v3.21

• Requirements

  • TerraSync v3.21 requires the GPS Pathfinder Office software v4.10

v3.21 - TerraSync software for Windows Mobile 5.0/6
(TerraSyncWMSetup.exe - 17239 KB)

v3.21 - TerraSync software for Windows Mobile 2003
(TerraSyncWM2003Setup.exe - 14778 KB)

v3.21 - TerraSync software for Windows 2000, Windows XP (Home, Professional, or Tablet PC Edition) & Windows Vista (Home Basic, Home Premium, Business, Ultimate, and Enterprise editions)
(TerraSyncDesktopSetup.exe - 11397 KB)

TerraSync Updater Utility
(Updater Setup.exe - 10197 KB)
It is recommended that you download and install the TerraSync Updater Utility. This utility allows you to update your v3.2x software with any new updates. The Updater Utility should be run periodically when you are connected to your device running TerraSync and when your PC is connected to the internet. The utility will inform you when new updates are available and assist you to update your TerraSync software.

_____________________________________________________

Version 3.20

• New Features

  • Support for the Trimble GPS Pathfinder ProXRT receiver

  • Accuracy-based logging filter

  • Real-time transformation of correction source datum

  • GLONASS support for the GPS Pathfinder ProXRT and R8 GNSS receivers

  • Refer to the version 3.20 Release Notes for a detailed listing of the new features in version 3.20, and installation instructions.

  • TerraSync v3.20 no longer supports Win CE .Net platforms

• Entitlement

  • Customers whose TerraSync software maintenance expiry date is on or after 3 March 2008 are eligible for a free upgrade to the new version. Use your existing installation code to upgrade to v3.20. Customers are eligible:

    • If you purchased TerraSync Professional edition on or after 3 March 2007.

    • If you purchased TerraSync Standard edition with 9-month software warranty extension on or after 3 March 2007

    • If you purchased TerraSync Standard edition with 90-day warranty on or after 4 December 2007

    • If you have a Software Maintenance Extension valid on 3 March 2008

  • If you do not have a Software Maintenance Extension valid on 3 March 2008, contact your local Tri-Global representative for details on upgrading to v3.20

• Requirements

  • TerraSync v3.20 requires the GPS Pathfinder Office software v4.10

v3.20 - TerraSync software for Windows Mobile 5.0/6
(TerraSyncWMSetup.exe - 17234 KB)

v3.20 - TerraSync software for Windows Mobile 2003
(TerraSyncWM2003Setup.exe - 14775 KB)

v3.20 - TerraSync software for Windows 2000, Windows XP (Home, Professional, or Tablet PC Edition) & Windows Vista (Home Basic, Home Premium, Business, Ultimate, and Enterprise editions)
(TerraSyncDesktopSetup.exe - 11394 KB)

TerraSync Updater Utility
(Updater Setup.exe - 10197 KB)
It is recommended that you download and install the TerraSync Updater Utility. This utility allows you to update your v3.2x software with any new updates. The Updater Utility should be run periodically when you are connected to your device running TerraSync and when your PC is connected to the internet. The utility will inform you when new updates are available and assist you to update your TerraSync software.

_____________________________________________________

Version 3.05

• New Features

  • Support for the Trimble Nomad series handheld

  • Refer to the version 3.05 Release Notes for a detailed listing of the new features in version 3.05, and installation instructions.

• Entitlement

  • Customers whose TerraSync software maintenance expiry date is on or after 5 November 2007 are eligible for a free upgrade to the new version. Use your existing installation code to upgrade to v3.05. Customers are eligible:

  • If you purchased TerraSync Professional edition on or after 1 March 2007.

  • If you purchased TerraSync Standard edition on or after 8 August 2007.

  • If you have a Software Maintenance Extension valid on 5 November 2007.

  • If you do not have a Software Maintenance Extension valid on 5 November 2007, contact your local Tri-Global representative for details on upgrading to v3.05.

• Requirements

  • TerraSync v3.05 requires the GPS Pathfinder Office software v4.00 and the Nomad Receiver Support Update (PFO400Update006 to support the Nomad receiver). Earlier versions of the GPS Pathfinder Office software will not allow you to download data collected in the TerraSync software version 3.05.

v3.05 - TerraSync software for Windows Mobile 5.0/6.0
(TerraSyncWM5Setup.exe - 15533 KB)

v3.05 - TerraSync software for Windows Mobile 2003
(TerraSyncWM2003Setup.exe - 13875 KB)

v3.05 - TerraSync software for Windows CE .NET (4.2 and later)
(TerraSyncGeoCE_NETWebSetup.exe - 13725 KB)

v3.05 - TerraSync software for Windows 2000, Windows XP (Home, Professional, or Tablet PC Edition) & Windows Vista (Home Basic, Home Premium, Business, Ultimate, and Enterprise editions)
(TerraSyncDesktopSetup.exe - 10735 KB)

TerraSync Updater Utility
(Updater Setup.exe - 10192 KB)
It is recommended that you download and install the TerraSync Updater Utility. This utility allows you to update your v3.0x software with any new updates. The Updater Utility should be run periodically when you are connected to your device running TerraSync and when your PC is connected to the internet. The utility will inform you when new updates are available and assist you to update your TerraSync software.

_____________________________________________________

Version 3.01

• New Features

  • Supports Juno ST handheld.

  • Refer to the version 3.01 Release Notes for a detailed listing of the new features in version 3.01, and installation instructions.

• Entitlement

  • If you purchased TerraSync after 23 January 2007 you are entitled to v3.01. Use your existing installation code (previously known as the installation serial number) to install v3.01.

  • If you have a Software Maintenance Extension valid on 23 April 2007 you are entitled to v3.01. Use your installation code to install v3.01.

  • If you do not have a Software Maintenance Extension valid on 23 April 2007, contact your local Tri-Global representative for details on upgrading to v3.01.

• Requirements

  • TerraSync v3.01 requires the GPS Pathfinder Office software v4.00. Earlier versions of the GPS Pathfinder Office software will not allow you to download data collected in the TerraSync software version 3.01.

v3.01 - TerraSync software for Windows 2000, Windows XP (Home, Professional, or Tablet PC Edition) & Windows Vista (Home Basic, Home Premium, Business, Ultimate, and Enterprise editions)
(TerraSyncDesktopSetup.exe - 10516 KB)

v3.01 - TerraSync software for Windows Mobile 5.0
(TerraSyncWM5Setup.exe - 15178 KB)

v3.01 - TerraSync software for Windows Mobile 2003
(TerraSyncWM2003Setup.exe - 13519 KB)

v3.01 - TerraSync software for Windows CE .NET (4.2 and later)
(TerraSyncGeoCE_NETWebSetup.exe - 13371 KB)

TerraSync Updater Utility
(Updater Setup.exe - 10192 KB)
It is recommended that you download and install the TerraSync Updater Utility. This utility allows you to update your v3.0x software with any new updates. The Updater Utility should be run periodically when you are connected to your device running TerraSync and when your PC is connected to the internet. The utility will inform you when new updates are available and assist you to update your TerraSync software.

_____________________________________________________

Version 3.00

• New Features

  • Supports multiple, overlay background files.

  • Supports ECW, MrSID Gen 3, and JPEG 2000 background image files.

  • New waypoint support in Map and Navigation sections.

  • Supports simple point feature Nesting functionality

  • Refer to the version 3.00 Rev A Release Notes for a detailed listing of the new features in version 3.00, and installation instructions.

• Entitlement

  • If you purchased TerraSync after 5 December 2006 you are entitled to v3.00. Use your existing installation code (previously known as the installation serial number) to install v3.00.

  • If you have a Software Maintenance Extension valid on 7 March 2007 you are entitled to v3.00. Use your installation code to install v3.00.

  • If you do not have a Software Maintenance Extension valid on 7 March 2007, contact your local Tri-Global representative for details on upgrading to v3.00.

• Requirements

  • TerraSync v3.00 requires the GPS Pathfinder Office software v4.00. Earlier versions of the GPS Pathfinder Office software will not allow you to download data collected in the TerraSync software version 3.00.

v3.00 - TerraSync software for Windows 2000, Windows XP (Home, Professional, or Tablet PC Edition) & Windows Vista (Home Basic, Home Premium, Business, Ultimate, and Enterprise editions)
(TerraSyncDesktopSetup.exe - 10565 KB)

v3.00 - TerraSync software for Windows Mobile 5.0
(TerraSyncWM5Setup.exe - 15325 KB)

v3.00 - TerraSync software for Windows Mobile 2003
(TerraSyncWM2003Setup.exe - 13678 KB)

v3.00 - TerraSync software for Windows CE .NET (4.2 and later)
(TerraSyncGeoCE_NETWebSetup.exe - 13529 KB)

TerraSync Updater Utility
(Updater Setup.exe - 10192 KB)
It is recommended that you download and install the TerraSync Updater Utility. This utility allows you to update your v3.0x software with any new updates. The Updater Utility should be run periodically when you are connected to your device running TerraSync and when your PC is connected to the internet. The utility will inform you when new updates are available and assist you to update your TerraSync software.

_____________________________________________________

Version 2.61

• New Features

  • Provides support for the GPS Pathfinder XC receiver.

  • Addresses a problem with GPS Pathfinder XB receivers outputting invalid time and position information.

  • Refer to the version 2.60 Rev C Release Notes for a detailed listing of the new features in version 2.61, and installation instructions.

• Entitlement

  • If you purchased v2.5x after 9 May 2006 you are entitled to v2.61. Use your installation serial number to install v2.61.

  • If you have a Software Maintenance Extension valid on 7 August 2006 you are entitled to v2.61. Use your installation serial number to install v2.61.

  • If you do not have a Software Maintenance Extension valid on 7 August 2006, contact your local Tri-Global representative for details on upgrading to v2.61.

• Requirements

  • TerraSync v2.61 requires GPS Pathfinder Office v3.10. Earlier versions of GPS Pathfinder Office will not allow you to download data collected in v2.61.

v2.61, TerraSync software for Windows 2000 & Windows XP (Home, Professional, or Tablet PC Edition)
(TerraSyncDesktopSetup.exe - 8024 KB)

v2.61, TerraSync software for Windows Mobile 5.0
(TerraSyncWM5Setup.exe - 5135 KB)

v2.61, TerraSync software for Windows Mobile 2003
(TerraSyncWM2003Setup.exe - 5135 KB)

v2.61, TerraSync software for Windows CE .NET
(TerraSyncWinCENETSetup.exe - 5475 KB)

TerraSync Updater Utility (English)
(TerraSyncUpdater.exe - 10080 KB)
It is recommended that you download and install the TerraSync Updater Utility. This utility allows you to update your v2.6x software with any new updates. The Updater Utility should be run periodically when you are connected to your device running TerraSync and when your PC is connected to the internet. The utility will inform you when new updates are available and assist you to update your TerraSync software.

_____________________________________________________

Version 2.53

• New Features

  • Refer to the Release Notes for a detailed listing of the new features and installation instructions.

• Entitlement

  • If you purchased v2.4x after 19 January 2005 you are entitled to v2.53. Use your installation serial number to install v2.53.

  • If you have a Field Software Enhancement Extension valid on 19 April 2005 you are entitled to v2.53. Use your installation serial number to install v2.53.

  • If you do not have a Field Software Enhancement Extension valid on 19 April 2005, contact your local Tri-Global representative for details on upgrading to v2.53.

• Requirements

  • TerraSync v2.53 requires GPS Pathfinder Office v3.10. Earlier versions of GPS Pathfinder Office will not allow you to download data collected in v2.53.

v2.53 for Windows 2000 and Windows XP (Home, Professional, or Tablet PC Edition)

* NOTE: Requires v3.7 or later of the ActiveSync software.

Installation Instructions

Before downloading the software, we recommend that you check out the Release Notes, recommended configuration, and tested devices.

• Download the software onto your desktop computer.

• Connect your Windows CE device to your computer via ActiveSync.

• Register your copy of the software at www.trimble.com/register to obtain an installation serial number.

• Run the installation program according to the instructions in the Release Notes.

• When prompted, enter the installation serial number.

• If you experience any difficulties upgrading please contact your local Tri-Global representative.

v2.53 - TerraSync, Software for HPC 2000 - ARM / XScale
(TerraSyncHPC2000ARMSetup.exe - 4932 KB)

v2.53 - TerraSync, Software for Pocket PC - ARM / XScale
(TerraSyncPPC2003ARMSetup.exe - 4591 KB)

v2.53 - TerraSync, Software for Windows 2000 & XP
(TerraSyncDesktopSetup.exe - 7470 KB)

v2.53 - TerraSync, Software for Windows Mobile 2005 - ARM / XScale
(TerraSyncPPC2005ARMSetup.exe - 4591 KB)

TerraSync Updater Utility (English)
(TerraSync250UpdaterSetup.exe - 9455 KB)
It is recommended that you download and install the TerraSync Updater Utility. This utility allows you to update your v2.5x software with any new updates. The Updater Utility should be run periodically when you are connected to your device running TerraSync and when your PC is connected to the internet. The utility will inform you when new updates are available and assist you to update your TerraSync software

_____________________________________________________

Version 2.41

• New Features

  • Refer to the Release Notes for a detailed listing of the new features and installation instructions.

• Entitlement

  • Your v2.40 authorization code can be used to install v2.41.

  • If you purchased v2.3x after June 24th 2003 you are entitled to v2.41. You will require a new authorization code. Please contact your Tri-Global Representative who will arrange for a new authorization code to be issued. This new code should be used when installing the software.

  • If you have a Field Software Enhancement Extension valid on September 16th 2003 you are entitled to v2.41. Your support code should be used when installing the software.

  • If you do not have a Field Software Enhancement Extension valid on September 16th 2003, contact your Tri-Global Representative for details on upgrading to v2.41.

• Requirements

  • TerraSync v2.41 requires GPS Pathfinder Office v3.00. Earlier versions of GPS Pathfinder Office will not allow you to download data collected in v2.41.

v2.41 for Windows 95, 98, ME, NT, 2000, XP and XP Tablet PC

* NOTE: Requires v3.7 or later of the ActiveSync Software.

Installation Instructions

Before downloading the software, we recommend that you check out the Release Notes, recommended configuration, and tested devices.

• Download the software onto your desktop computer.

• Connect your Windows CE device to your computer via ActiveSync.

• Run the installation program according to the instructions in the Release Notes.

• When prompted, enter the serial number and authorization code.

• If you experience any difficulties upgrading please contact your Local Tri-Global Representative.

2.41 - TerraSync, Software for Windows 95, 98, ME, NT, 2000, & XP (English)
(TerraSync_2.41_Desktop.exe - 6533 KB)

v2.41 - TerraSync, Software for HPC 2000 - ARM / XScale (English)
(TerraSync_2.41_HPC_ARM.exe - 4562 KB)

v2.41 - TerraSync, Software for HPC 2000 - MIPS (English)
(TerraSync_2.41_HPC_MIPS.exe - 4857 KB)

v2.41 - TerraSync, Software for Pocket PC - ARM / XScale (English)
(TerraSync_2.41_PPC_ARM.exe - 4567 KB)

TerraSync Updater Utility (English)
(TerraSyncUpdater.exe - 1926 KB)
It is recommended that you download and install the TerraSync Updater Utility. This utility allows you to update your v2.40 or later software with any new updates. The Updater Utility should be run periodically when you are connected to your device running TerraSync and when your PC is connected to the internet. The utility will inform you when new updates are available and assist you to update your TerraSync software.

_____________________________________________________

Version 2.31

v2.31 Software (Trimble Recon device only)
(TerraSync 2.31_ARM_HPC2000.exe - 4050 KB)

From here you can download v2.31 of the TerraSync software. This version of TerraSync is only required for installation to the Trimble Recon device.

• Entitlement

  • Your v2.30 authorization code can be used to install v2.31.

Refer to the Release Notes for further details of this version and installation instructions.

_____________________________________________________

Version 2.30

• New Features

  • Refer to the Release Notes for further details of this version and installation instructions.

• Entitlement

  • If you purchased v2.2x after Dec 2nd 2002 you are entitled to v2.30. You will require a new authorization code. Please contact your Tri-Global Representative who will arrange for a new authorization code to be issued. This new code should be used when installing the software.

  • If you have a Field Software Enhancement Extension valid on 3rd March 2003 you are entitled to v2.30. Your support code should be used when installing the software.

  • If you do not have a Field Software Enhancement Extension valid on 3rd March 2003, contact your Tri-Global Representative for details on upgrading to v2.30.

v2.30 for Windows 95, 98, ME, NT, 2000, and XP

Installation Instructions

Before downloading the software, we recommend that you check out the Release Notes, recommended configuration, and tested devices.

• Download the software onto your desktop computer.

• Connect your Windows CE device to your computer via ActiveSync.

• Run the installation program according to the instructions in the Release Notes.

• When prompted, enter the serial number and authorization code.

• If you experience any difficulties upgrading please contact your Local Tri-Global Representative.

v2.30 - TerraSync, Software for HPC 2000 - ARM / XScale - CE 3.0 / CE 4.0 (English)
(TerraSync_ARM_HPC.exe - 4477 KB)

v2.30 - TerraSync, Software for Pocket PC / Pocket PC 2002 - ARM / XScale - CE v3.0 (English)
(TerraSync_ARM_PPC.exe - 4488 KB)

v2.30 - TerraSync, Software for HPC 2000 - MIPS - CE v3.0 (English)
(TerraSync_MIPS_HPC.exe - 4748 KB)

v2.30 - TerraSync, Software for Windows 95, 98, ME, NT, 2000, & XP (English)
(TerraSync_Desktop.exe - 7538 KB)

v2.30 - TerraSync, Software for Pocket PC - MIPS - CE v3.0 (English)
(TerraSync_MIPS_PPC.exe - 4753 KB)

TerraSync Updater Utility (English)
(TerraSyncUpdater.exe - 1927 KB)
It is recommended that you download and install the TerraSync Updater Utility. This utility allows you to update your v2.20 or v2.3x software with any new updates. The Updater Utility should be run periodically when you are connected to your device running TerraSync and when your PC is connected to the internet. The utility will inform you when new updates are available and assist you to update your TerraSync software.

_____________________________________________________

Version 2.21

• If you have v2.20 you are entitled to v2.21. Your authorization code used for installing v2.20 should be used when installing the software.

• If you purchased v2.10 after May 7th 2002 you are entitled to v2.21. Your authorization code issued with v2.10 should be used when installing the software.

• If you have a Field Software Enhancement Extension valid on August 5th 2002 you are entitled to v2.21. Your support code should be used when installing the software.

• If you do not have a Field Software Enhancement Extension valid on August 5th 2002, contact your Local Tri-Global Representative for details on upgrading to v2.21.

• Refer to the Release Notes for installation instructions and the new features in this version.

v2.21 for Windows 95, 98, ME, NT, 2000, and XP

Installation Instructions

Before downloading the software, we recommend that you check out the Release Notes, recommended configuration, and tested devices.

• Download the software onto your desktop computer.

• Connect your Windows CE device to your computer via ActiveSync.

• Run the installation program according to the instructions in the Release Notes.

• When prompted, enter the serial number and authorization code.

• If you experience any difficulties upgrading please contact your Local Tri-Global Representative.

v2.21 - TerraSync, Software for Windows 95, 98, ME, NT, 2000, & XP (English)
(TerraSync_Desktop.exe - 6929 KB)

v2.21 - TerraSync, Software for Pocket PC - ARM - CEv3.0 (English)
(TerraSync_ARM_PPC.exe - 3919 KB)

v2.21 - TerraSync, Software for HPC 2000 - x86 - CE v3.0 (English)
(TerraSync_X86_HPC2000.exe - 3680 KB)

v2.21 - TerraSync, Software for Pocket PC - SH3 - CEv3.0 (English)
(TerraSync_SH3_PPC.exe - 4400 KB)

v2.21 - TerraSync, Software for HPC 2000 - ARM - CE v3.0 (English)
(TerraSync_ARM_HPC2000.exe - 3908 KB)

v2.21 - TerraSync, Software for Pocket PC - MIPS - CE v3.0 (English)
(TerraSync_MIPS_PPC.exe - 4271 KB)

TerraSync Updater Utility (English)
(TerraSyncUpdater.exe - 1927 KB)
It is recommended that you download and install the TerraSync Updater Utility. This utility allows you to update your v2.20 or v2.3x software with any new updates. The Updater Utility should be run periodically when you are connected to your device running TerraSync and when your PC is connected to the internet. The utility will inform you when new updates are available and assist you to update your TerraSync software.

_____________________________________________________

Version 1.22

• Free software for TerraSync version 1.20 and 1.21 users.

• Requires a valid TerraSync v1.20 installation or support code to run.

• Refer to the Release Notes for installation instructions and the new features in this version.

v1.22 - TerraSync, Software for HPC Pro 2000 - ARM - CEv3.0 (English)
(TerraSync_ARM_HPC2000.exe - 3112 KB)

v1.22 - TerraSync, Software for Pocket PC - MIPS - CEv3.0 (English)
(TerraSync_MIPS_PocketPC_Full.exe - 3409 KB)

v1.22 - TerraSync, Software for Palm PC - MIPS - CEv2.11 (English)
(TerraSync_MIPS_PPC_Full.exe - 3409 KB)

v1.22 - TerraSync, Software for HPC Pro - ARM - CEv2.11/2.12 (English)
(TerraSync_ARM_HPCPro_V212.exe - 3112 KB)

v1.22 - TerraSync, Software for HPC Pro - x86 - CEv2.11/2.12 (English)
(TerraSync_x86_Full.exe - 2901 KB)

v1.22 - TerraSync, Software for Pocket PC - SH3 - CEv3.0 (English)
(TerraSync_SH3_PocketPC_Full.exe - 3380 KB)

v1.22 - TerraSync, Software for Pocket PC - ARM - CEv3.0 (English)
(TerraSync_ARM_PocketPC_Full.exe - 3136 KB)

v1.22 - TerraSync, Software for HPC Pro - MIPS - CEv2.11/v2.12 (English)
(TerraSync_MIPS_HPCPro_Full.exe - 3404 KB)

Language Files for v1.22

v1.22 - TerraSync, Language Files (French)
(TerraSyncLanguage_French.exe - 1275 KB)

v1.22 - TerraSync, Language Files (Japanese)
(TerraSyncLanguage_Japanese.exe - 1235 KB)

v1.22 - TerraSync, Language Files (Spanish)
(TerraSyncLanguage_Spanish.exe - 1274 KB)

v1.22 - TerraSync, Language Files (Portuguese)
(TerraSyncLanguage_Portuguese.exe - 1273 KB)

v1.22 - TerraSync, Language Files (German)
(TerraSyncLanguage_German.exe - 1251 KB)

v1.22 - TerraSync, Language Files (Chinese)
(TerraSyncLanguage_Chinese.exe - 1250 KB)

v1.22 - TerraSync, Language Files (Italian)
(TerraSyncLanguage_Italian.exe - 1267 KB)

v1.22 - TerraSync, Language Files (Russian)
(TerraSyncLanguage_Russian.exe - 1274 KB)

v1.22 - TerraSync, Language Files (Korean)
(TerraSyncLanguage_Korean.exe - 1258 KB)

• Version 1.22.

• Installation files for all device types.

• Free install for all TerraSync version 1.22 users.

• Requires TerraSync version 1.22 to be installed first.

• Size: ~1.4 MB each.

Installation Instructions

• You must install the TerraSync version 1.22 software update first. These language files will not work with any other version of TerraSync.

• Download the language file package onto your desktop computer.

• Connect your Pocket PC or Windows CE device to your computer via ActiveSync.

• Run the installation program according to the instructions in the Release Notes

Asian Font Files for v1.22

Asian font installation files are available for Chinese, Japanese, and Korean.
Note: Not supported on Juniper Allegro.

TerraSync, Font Files (Japanese)
(FontInstallation_Japanese.exe - 3652 KB)

TerraSync, Font Files (Chinese)
(FontInstallation_Chinese.exe - 2276 KB)

TerraSync, Font Files (Korean)
(FontInstallation_Korean.exe - 3213 KB)

• Asian font file installations for all device types.

• Works with TerraSync software version 1.21 and later.

• Free install for all TerraSync users.

• Note: You do not need to install a font if your CE device already has the appropriate language version of the operating system (i.e. Japanese Windows CE).

Installation Instructions

• You must first install the TerraSync version 1.22 software update and appropriate TerraSync language files before installing fonts.

• Download the font file package onto your desktop computer.

• Connect your Pocket PC or Windows CE device to your computer via ActiveSync.

• Run the installation program according to the instructions in the Release Notes

_____________________________________________________

Other Downloads

SBAS.INI
(SBAS.ini - KB)
Updated: 1 August 2007

• Contains the list of SBAS satellites, including the two recently launched WAAS satellites - PRNs 135 and 138.
• Required when using Custom mode in Trimble field software to select particular satellites to track, and exclude from the tracking list.
• Details on the new WAAS satellites and how to install the SBAS.INI file are included in the Support Note titled Status Update: New WAAS Satellites and Trimble GPS Receivers.

SATDGPS.INI File
(Satdgps.ini - 2 KB)
Updated: 21 April 2009

• Contains the list of frequencies used by satellite DGPS providers.
• Updated for changes to the satellite frequency for use in New Zealand.
• If you have TerraSync, GPS Controller, GPScorrect, or an application developed using the GPS Pathfinder Tools SDK installed on a PC, copy this file into the folder C:\Program Files\Common Files\Trimble\Config.
• If you have TerraSync, GPS Controller, GPScorrect, or an application developed using the GPS Pathfinder Tools SDK installed on a Windows CE or Windows Mobile for Pocket PCs operating system, copy this file into the folder \Program Files\Common Files\Trimble\Config. This folder will be located on the Disk or in RAM depending on where the software is installed
• If you have GPS Analyst v2.00 or later, copy this file into the folder C:\Program Files\Trimble\GPS Analyst\Bin.
• If you have GPS Analyst v1.20 or earlier, copy this file into the folder C:\Program Files\Common Files\Trimble\Config.
• If you are using Asset Surveyor download this version of SATDGPS.INI and use the GPS Pathfinder Office Data Transfer utility to load this file onto your device.

ANTENNA.INI File (Translated)
(TranslatedAntenna.zip - 349 KB)
Translated Antenna files for Mapping & GIS Software
(updated 10 March 2008).

This zip file contains translated antenna files for use with the following software:

• Trimble GPS Pathfinder Office

• TerraSync

• GPScorrect extension for ArcPad

Antenna types, names, and measurement points have been translated in the following languages:

• Chinese (Simplified)

• Chinese (Traditional)

• Croatian

• Czech

• Danish

• Dutch

• English

• Estonian

• Finnish

• French

• German

• Greek

• Hungarian

• Italian

• Japanese

• Korean

• Norwegian

• Polish

• Portuguese

• Russian

• Serbian

• Spanish

• Swedish

• Turkish

To use a translated antenna file see instructions in the readme.txt file.